Services you can request on Bloom

70 services across ten categories, offered through 1,600+ provider listings. Pick a service below and your request opens with it filled in, or describe the job in your own words.

Post for free Browse services

The Bloom network

500+ providers · 1,000+ locations

Manufacturing & assembly

Across the continental U.S., in the metros shown on the map.

Locations anonymized and representative; members see the network by name.

Colored dots show where each kind of provider clusters, not individual shops. Pick a category below to hold one layer.

Manufacturing

CNC Machining

Milled and turned parts to tight tolerance, 3- to 5-axis.

Example request: 250 housings, 6061-T6, ±0.001 in on the bore, anodized black

Start a request

Injection Molding

Tooling and production molding for plastic components at volume.

Example request: 40k PC/ABS enclosures a year, 2-cavity tool, T1 samples first

Start a request

Sheet Metal Fabrication

Laser cutting, bending, punching and welded assemblies.

Example request: 120 welded cabinets, 14 ga CRS, PEM studs, powder coat

Start a request

Additive Manufacturing

Industrial 3D printing in polymer and metal for prototype or end-use.

Example request: 60 assembly jigs, SLS in PA12, dyed black, largest part 280 mm

Start a request

Casting & Forging

Sand, investment and die casting plus forged near-net shapes.

Example request: 500 investment-cast motor mounts, 17-4 PH stainless, bores machined

Start a request

Composites

Carbon and glass fiber parts, from wet layup to autoclave-cured prepreg.

Example request: 40 carbon fiber drone arms, prepreg, 8 plies [0/+45/-45/90]s, autoclave cured

Start a request

Assembly & Kitting

Sub-assembly, final assembly, packing and kitted delivery.

Example request: 3k retail units: final assembly, torque logged, serialized, boxed and labeled

Start a request

PCB Assembly & Box Build

SMT and through-hole boards assembled, tested and built into the enclosure.

Example request: 500 six-layer flight controller boards, turnkey, 0402 passives and two BGAs, IPC-A-610 Class 2, X-ray on the BGAs

Start a request

Wire Harnesses

Harnesses and cable assemblies built to your pin-out and continuity tested.

Example request: 1,000 e-bike main harnesses, 14 circuits, 18 and 22 AWG, sealed connectors, continuity and hipot tested

Start a request

Battery Pack Assembly

Cells matched, welded, wired to the BMS and closed into a working pack.

Example request: 200 e-bike packs, 13S4P, 21700 NMC, 48 V, customer-supplied BMS

Start a request

Vehicle Assembly

E-bikes, scooters and low-speed vehicles built from SKD or CKD kits and tested at end of line.

Example request: 1,200 e-bikes a year from SKD kits, torque logged, end-of-line test

Start a request

Surface Finishing

Anodizing, plating, powder coat, polishing and passivation.

Example request: 1,500 6061 motor mounts, Type II anodize, black, sealed, threads masked

Start a request

Custom Build

Builds that cross several processes, or match none of them. Describe the project; we match it to job shops, contract manufacturers and integrators whose capabilities fit, and you approve who bids.

Example request: 20 sensor masts: welded frame, powder coat, harness and final assembly

Start a request

Engineering

Mechanical Design

Concept through detailed CAD, drawings and release packs.

Example request: Release pack for a 90-part assembly, STEP plus GD&T drawings

Start a request

Electrical & PCB Design

Schematic capture, layout, BOM and design-for-test.

Example request: 6-layer motor control board, 48 V input, schematic through Gerbers and BOM

Start a request

Firmware & Embedded

Bare-metal and RTOS firmware, drivers and bring-up.

Example request: FreeRTOS on an STM32 sensor node: bring-up, 4 sensor drivers, OTA bootloader

Start a request

DFM & Cost Review

Manufacturability and cost-down review before you commit to tooling.

Example request: Pre-tooling review, 12-part PC/ABS enclosure, 5k units a year

Start a request

Tooling & Fixture Design

Jigs, fixtures, molds and press tools designed to your process.

Example request: Weld fixtures for a steel frame, 4 stations, locating pins and toggle clamps

Start a request

Simulation & FEA

Structural, thermal and flow simulation with reported margins.

Example request: Static, thermal and random-vibration study on a cast aluminum housing, 4 load cases

Start a request

Shipping

Freight Forwarding

Sea, air, road and rail bookings with consolidated documentation.

Example request: 12 × 40' HC a quarter, FOB Yantian to Long Beach, delivered to a Riverside DC

Start a request

Customs Brokerage

U.S. entry filing, HTS classification and clearance, plus the export filings on the way out.

Example request: Weekly ocean entries at Long Beach, e-bikes and spare batteries, continuous bond

Start a request

Drayage

Ocean containers moved between the port or rail ramp and your warehouse.

Example request: Four 40 ft high-cube containers of scooter SKD kits, Long Beach to Ontario, CA, live unload

Start a request

Truckload & LTL Freight

Full and shared-trailer road freight, with every accessorial quoted as a line item.

Example request: 4 pallets of crated robot bases, 48 x 40 x 60 in, 1,800 lb each, liftgate at delivery, Reno to Dallas

Start a request

Final-Mile Delivery

Regional and metro delivery including timed and white-glove.

Example request: 80 crated robots, 400 lb each, commercial docks, 2-hour windows, uncrated and placed

Start a request

Cold Chain

Temperature-controlled transport with continuous monitoring.

Example request: 8 pallets of prepreg rolls, −18 °C, logger in every box, data with the POD

Start a request

Hazmat Transport

Lithium packs and other dangerous goods, declared and packed for the mode.

Example request: 4 pallets of 21700 cells, UN 3480, Class 9, by road

Start a request

Project & Oversize Cargo

Heavy-lift, out-of-gauge and multi-leg project moves.

Example request: 62,000 lb press, 11 ft wide, 400 miles, permits and route survey

Start a request

Vehicle Transport & Roll-On Roll-Off

Built vehicles and robots moved by open or enclosed trailer, or roll-on roll-off by sea.

Example request: 12 low-speed vehicles, running, enclosed trailer, Phoenix to Denver

Start a request

Warehousing

Bonded Storage

Duty-suspended storage under customs supervision.

Example request: 600 pallets of e-bike parts, held up to 12 months, a third re-exported

Start a request

Fulfillment & Pick-Pack

Order fulfillment with pick, pack, label and carrier handoff.

Example request: 4k D2C orders a month, 1.3 units per order, 120 SKUs, Shopify

Start a request

Cross-Docking

Inbound sorted straight to outbound with minimal dwell time.

Example request: 2 inbound truckloads a day, sorted and relabeled to 9 dealers

Start a request

Inventory Management

Cycle counting, stock accuracy programs and system integration.

Example request: Cycle counts on 1,800 SKUs across 2 sites, synced to NetSuite

Start a request

Climate-Controlled Storage

Temperature and humidity controlled space with logged conditions.

Example request: 200 pallets of electronics, 15 to 25 °C, 40 to 60% RH

Start a request

Lithium Battery Storage

Cells, packs and battery-powered products stored at sites permitted to hold them.

Example request: 60 pallets of 48 V e-bike packs, 30% state of charge, 6 months

Start a request

After-Sales Services

Field Service & Repair

On-site diagnosis, repair and planned maintenance visits.

Example request: Quarterly maintenance and fault calls, 30 sites, spares stocked in 3 regions

Start a request

Spare Parts Supply

Spares sourcing, stocking and obsolescence management.

Example request: 60 spare-part lines, stocked and shipped, 8 years of support

Start a request

Warranty Administration

Claims handling, cost recovery and failure reporting.

Example request: Claims intake and supplier recovery, 5,000 units in the field

Start a request

Refurbishment

Strip, inspect, replace and recertify returned units.

Example request: 400 returned scooters, grade A/B/scrap, repair and retest to spec

Start a request

Reverse Logistics

Returns collection, triage, disposition and recycling.

Example request: 150 returned e-bikes a month, RMA to triage, restock or recycle

Start a request

Product Design

Industrial Design

Form, ergonomics and design language through to CMF intent.

Example request: Handheld scanner housing: 3 concept directions, foam models, looks-like model, CMF spec

Start a request

UX & Interface Design

On-product and companion app interface design and flows.

Example request: 7-inch touchscreen HMI for gloved operators, plus a companion app

Start a request

Packaging Design

Structural and graphic packaging including retail and transit.

Example request: Retail carton and transit pack for a 12 lb unit, tested to ISTA 3A for parcel

Start a request

Prototyping

Looks-like and works-like prototypes for review and testing.

Example request: 6 works-like units, urethane-cast housings, for a field test

Start a request

Materials & CMF

Material selection, color, finish and sample libraries.

Example request: CMF spec for a molded housing, 3 colorways, color chips and texture plaques

Start a request

Scanning

3D Laser Scanning

Structured light and laser capture of parts, assemblies and sites.

Example request: Legacy gearbox housing, 600 mm, on-site capture to ±0.05 mm, mesh and point cloud

Start a request

Photogrammetry

Photo-based capture for large objects and as-built environments.

Example request: As-built plant survey, 2 bays, ±5 mm, point cloud and mesh

Start a request

Reverse Engineering

Scan data converted to parametric, editable CAD models.

Example request: Obsolete cast bracket, 2 samples, to parametric STEP and a drawing

Start a request

CAD Surface Reconstruction

Class-A and freeform surfacing rebuilt from mesh data.

Example request: Scooter front fender from scan, Class-A surfaces within 0.1 mm, STEP and native CATIA

Start a request

Metrology & Inspection Reporting

Dimensional inspection against drawing with first-article reports.

Example request: AS9102 first article, 40 ballooned features, CMM report

Start a request

Testing Services

Materials Testing

Tensile, hardness, composition and metallurgical analysis.

Example request: Tensile to ASTM E8 and hardness, 20 heats of 6061-T6 bar

Start a request

Environmental & Climatic

Thermal cycling, humidity, salt spray, IP ingress and vibration.

Example request: IP67 immersion plus 100 thermal cycles, −40 to 85 °C, 3 powered units

Start a request

EMC & Electrical Safety

Emissions, immunity and safety testing to regional standards.

Example request: E-bike drive system, FCC Part 15B emissions and UL 2849 evidence pack, 3 units

Start a request

Non-Destructive Testing

Ultrasonic, radiographic, dye penetrant and magnetic particle.

Example request: UT and dye penetrant on 200 steel welds, AWS D1.1 acceptance

Start a request

Life Cycle & Fatigue

Accelerated life, endurance and fatigue-to-failure programs.

Example request: Folding-stem hinge, 50k cycles at 1.5× rated load, 3 samples

Start a request

Trade Services

Sourcing & Procurement

Supplier identification, RFQ management and negotiation support.

Example request: Second source for 14 machined parts, 5,000 a year, drawings attached

Start a request

Trade Finance

Letters of credit, invoice finance and payment risk cover.

Example request: Letter of credit for a first production order with a new overseas factory

Start a request

Export Documentation

Certificates of origin, packing lists and compliance paperwork.

Example request: USMCA certifications of origin, weekly truckloads to Mexico

Start a request

Tariff & Duty Advisory

Classification, duty planning and free trade agreement use.

Example request: HTS review and landed cost for 40 import lines, China and Vietnam origin

Start a request

Supplier Audits

On-site quality, social and capability audits with scored reports.

Example request: Pre-award audit, 4 shortlisted shops

Start a request

Multi-Service Programs

One build, several providers: a machine shop, an assembler, a freight desk. Each part is matched to providers whose capabilities fit; Bloom coordinates it as one job.

Example request: Machined frames, harnesses, final assembly and freight for 50 robots

Start a request